Choose a drill bit that matches the pilot hole size needed for the anchor you intend to use. In other words, use a 5.0mm drill for a yellow cap, a 6.0mm drill for a red cap, a 7.0mm drill for a brown cap, or a 10.0mm drill mm drill for a blue cap.
What corresponds to a 5/16 bit?
The drill should be the same size as the shank of the screw, regardless of the thread. This is done by simply aligning a screw side-by-side with the bit. If they’re the same size, you’re good to go. You can also look up the dimensions listed on most bits and screws.
What can I use if I don’t have the right size drill bit?
The drill should be the same size as the shank of the screw, regardless of the thread. This is done by simply aligning a screw side-by-side with the bit. If they’re the same size, you’re good to go. You can also look up the dimensions listed on most bits and screws.
Which drill is closest to 5 16?
Comparing Fractions: Fractions can be compared if they have a common denominator. For example, 5/16 inch and 3/8 inch are two measurements on a ruler. To compare the two fractions, they must have a common denominator, 16. 3/8 is greater than 5/16.
Which is the larger 3/8 or 5/16 bit?
If you break it down into 16ths, 5/8ths are 10/16ths. So the next larger size would be 11/16. If you want to stay in 1/8 then of course in 6/8 or 3/4. If you break it down into 16ths, 5/8ths are 10/16ths. 21
What can I use instead of the 5/8 drill bit?
Comparing Fractions: Fractions can be compared if they have a common denominator. For example, 5/16 inch and 3/8 inch are two measurements on a ruler. To compare the two fractions, they must have a common denominator, 16. 3/8 is greater than 5/16.
What can I use if I don’t have the right size drill bit?
The drill should be the same size as the shank of the screw, regardless of the thread. This is done by simply aligning a screw side-by-side with the bit. If they’re the same size, you’re good to go. You can also look up the dimensions listed on most bits and screws.
Can I use a different drill size?
The bit size reflects the diameter of the body. Some projects call for specific bit sizes, but a bit set that includes sizes from 1/16″ to 1/4″ will work for many jobs around the home and business. You can add larger bits – 5/16″, 3/8″, 7/16″ and 1/2″ – if you need them.
How do I know what size drill bit to use?
The drill should be the same size as the shank of the screw, regardless of the thread. This is done by simply aligning a screw side-by-side with the bit. If they’re the same size, you’re good to go. You can also look up the dimensions listed on most bits and screws.