Starting the diagnostics To get started we need to start the refrigerator diagnostics mode. To do this, open the refrigerator door and, depending on the type of refrigerator, press one or both door switches. Then, within ten seconds, press the fridge temperature button (+) three times and release the light switch(es).
How do I reset the control panel on my Whirlpool refrigerator?
Reset the refrigerator
- Turn off the product by turning off the circuit breaker(s) or unplugging the product for 5-10 minutes.
- Turn on the product by turning on the circuit breaker(s) or reconnecting the product.
- Make sure the cooling function is enabled.
- Test the functionality of the control panel.
Does a Whirlpool refrigerator have a reset button?
There is no reset button on a fridge, but there are many things that can keep it from going cold. There is no reset button on most refrigerator models.
How to diagnose a refrigerator problem?
Vacuum the coils under or behind the fridge. Clogged coils can lead to poor cooling. Make sure nothing is stuck in the condenser fan and that it spins freely (rear coil models do not have a fan). To do this, unplug the refrigerator and remove it.
How do you fix a Whirlpool refrigerator that won’t cool?
Vacuum the coils under or behind the fridge. Clogged coils can lead to poor cooling. Make sure nothing is stuck in the condenser fan and that it spins freely (rear coil models do not have a fan). To do this, unplug the refrigerator and remove it.
How do I test a Whirlpool refrigerator control board?
First of all, we need to start the diagnostic mode for refrigerators. To do this, open the refrigerator door and, depending on the type of refrigerator, press one or both door switches. Then, within ten seconds, press the fridge temperature button (+) three times and release the light switch(es).
How do I program a Whirlpool refrigerator control board?
Programming mode (version 2):
- Hold down the WATER keyboard.
- Press and hold the LL keyboard.
- Release the WATER keyboard and wait 3 seconds.
- The controller displays PE to indicate programming mode.
- The entry is confirmed by pressing the LL keyboard again.
- The command shows the current program code.
How do I troubleshoot a Whirlpool refrigerator?
Dirty condenser coils are the number one cause of a Whirlpool refrigerator not cooling. Condenser coils give off heat when refrigerant flows through them. When the coils become clogged with dirt and debris, they cannot conduct heat properly.
What’s the first thing to check when a refrigerator stops working?
The first thing to check is the circuit breaker (in your home’s electrical panel) for the circuit that powers the refrigerator.
Why does the refrigerator suddenly stop working?
Typical causes are: 1) Door is left open frequently, 2) Condenser coils need cleaning, 3) Door not sealing against cooler, 4) Refrigeration regulator is too hot, cold, or 5) Something is blocking the flow of cold air inside the refrigerator. 26
Is there a recall for Whirlpool refrigerators?
Those with Group A refrigerators remain subject to the December 31, 2021 end date, prior to which Whirlpool will replace PTrap parts for Group A members who had ice build-up and ice build-up detected within five years of purchase and reported to Whirlpool by a technician have /or water runs on the floor of their class… 11
How long does a Whirlpool refrigerator take to cool down?
The most important point to remember is that chilling time varies widely between brands. For example, Whirlpool refrigerators take 24 hours to cool down, while Samsung models only take 2 hours.