Pipes can be cleaned and primed before gluing. The primer not only cleans the PVC but starts to melt the PVC slightly. Glue is used to glue the softened pipe and its fitting together. White PVC primer generally requires the use of a cleaner, while gray PVC does not require a cleaner. 9
What can I use instead of PVC cleaner?
The only substitute for cleaner is primer. The only substitute for primer is cleaner. Both contain MEK (Methyl Ethyl Keytone) and Acytone (and other nasty chemicals). The main difference between the two is that the foundation contains a purple dye. 11
What is PVC cleaner used for?
PVC Cleaner has been specially developed to clean materials such as PVC pipes and window frames. This product contains a range of chemical solvents that will remove stains, grease and dirt from PVC. The cleaners are aggressive enough to remove stains from PVC without damaging the structural integrity of the materials.
Is purple primer the same as cleanser?
Oatey® Purple Primer/Cleaner is a dual purpose primer and cleaner for use on all grades and grades of CPVC and PVC pipe and fittings. … Installation professionals have trusted Oatey products for over 100 years.
Do you need a purple primer on PVC pipes?
Purple Primer can be used with all types, schedules and grades of PVC and CPVC pipe and fittings. A low VOC formulation. In most cases a successful bond line can be achieved without priming. However, if you want to increase the likelihood of a successful connection, using a primer is the way to go.
Should You Use a PVC Pipe Cleaner?
Pipes can be cleaned and primed before gluing. The primer not only cleans the PVC but starts to melt the PVC slightly. Glue is used to glue the softened pipe and its fitting together. White PVC primer generally requires the use of a cleaner, while gray PVC does not require a cleaner.
Is PVC cleaner acetone?
The most common method of removing manufacturer’s ink stains from the surface of PVC pipes is to use acetone to break up and thin the ink.
What is PVC primer used for?
The purpose of the primer is to start the chemical reaction that softens the PVC and provide a prepared, level surface for the solvent cement. As you may know, PVC joints are not exactly glued, but fused together through a chemical change. The softer the outer layer of your PVC, the better it will cement itself into your joint.
What is oatey clear cleanser used for?
Oatey® Clear Cleaner is a fast-acting cleaner that removes surface dirt, grease and grime. Formulated for ABS, PVC and CPVC pipe and fittings.
Are cleaner and primer the same?
The cleaner only sometimes contains tetrahydrofuran, unlike the primer, which always contains it. The cleaner is used to prepare the surface to remove dirt, oil or contaminants that could weaken a seal. However, cleaners and primers are usually combined in one product to clean and soften surfaces in one step.
What is purple primer used for?
Oatey® Purple Primer is formulated for PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime and softens the pipe surface to enable quick and safe solvent welding.
What is a primer cleaner?
PRIMER CLEANER 64 as a primer penetrates and softens the surface of pipes and fittings for bonding. As a cleaner, it removes grease, oil and dirt from surfaces to be bonded. For use with all types, classes and schedules of PVC and CPVC pipe and fittings.
What is the difference between clear and purple PVC primer?
Known member. The purple is so that the home inspector can tell the plumber by visual inspection that a primer has been used. Clear is good to use.
What does purple primer do to PVC?
Purple Primer can be used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe. The purpose of the primer is to clean and soften the outside coating of the pipe so that the cement itself will adhere better.
Is a primer required for PVC pipes?
Connecting a pipe to a pipe fitting requires a specially formulated primer and cement – not ordinary glue, but a chemical solvent that melts the surface of the PVC and then quickly cures to fuse the parts together.
Can PVC be painted without a primer?
If you hand paint the PVC, apply a thin coat of primer and let it dry, then apply the first coat of paint. A primer is only necessary if you want to benefit from the paint manufacturer’s guarantee. Paint: Choose a premium 100% acrylic latex exterior paint in a matte, satin, semi-gloss or gloss finish.
Do plumbers use purple primer?
Plumbers use a purple primer to prepare PVC pipe for bonding, it cleans the surface of the pipe and matts the surface to ensure the adhesive makes a permanent bond.