Note: Sanding between coats is not required but will provide a better finish. After a coat has dried, use 220 or 240 grit sandpaper or extra fine steel wool to lightly sand the surface. Sanding creates a white film on the surface, but this will disappear when you apply the next coat. Do not sand finish coat.
What is the best way to apply Minwax PolyShades?
The best way to apply an even coat of Minwax® PolyShades® is to use the tip of a good quality natural bristle brush to apply a thin coat in long, gentle strokes.
Should I sand before using PolyShades?
Why PolyShades®? Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane coated wood. No heavy stripping or sanding is required to remove the old finish!
Are the PolyShades in two layers?
To get a great result with PolyShades®, apply two or three very thin coats, build up the film and color slowly, rather than trying to apply one thick coat. Allow Polyshades® to dry for 6 hours between coats. Be sure to shake the can well before use and occasionally during use. 5
What happens if you don’t sand between the polyurethane layers?
A: Nothing, as long as you apply each top coat within a reasonable time frame. If you get dust spots or brush marks in the finish, sanding will smooth them out and your next coat will look better working on a smooth surface. 29
Can I apply PolyShades with a cloth?
With a stain cloth, apply excess stains in one step and then remove them. You have more control over how much dye you apply and how you spread it. Using a cloth will also eliminate the bubbles created when applying Polyshades with a brush. … Then a second coat of Polyshades stain was applied.
What should be used to apply PolyShades?
You may be able to apply the tinted poly with a roller and then brush it out, which might save you some time. Well. it went very well, pleasantly and evenly.
Can you use a roller with Minwax PolyShades?
Note: Sanding between coats is not required but will provide a better finish. After a coat has dried, use 220 or 240 grit sandpaper or extra fine steel wool to lightly sand the surface. Sanding creates a white film on the surface, but this will disappear when you apply the next coat. Do not sand finish coat.
Is it really necessary to sand between coats of polyurethane?
The primary reason for sanding polyurethane between coats is to smooth out dust spots and other imperfections, not create better adhesion. This is shown here by the shine that remains in the pores after the surface has been sanded. The next layer of paint always sticks in the pores, although the paint is rarely scratched there.
Can a second coat of polyurethane be applied without sanding?
There is no substitute for sanding between coats when you want the best finish. I get the best results when building or renovating furniture when I dilute oil based urethane with 3 parts urethane and 1 part mineral spirits for the first coat. After the first coat, sand with 220 grit and wipe with a vacuum cleaner cloth.
Is it really necessary to sand between coats of polyurethane?
The primary reason for sanding polyurethane between coats is to smooth out dust spots and other imperfections, not create better adhesion. This is shown here by the shine that remains in the pores after the surface has been sanded. The next layer of paint always sticks in the pores, although the paint is rarely scratched there.