comment on acid neutralization?
It is possible to neutralize a stock of concentrated sulfuric acid with baking soda (baking soda) without too much risk, while neutralization with sodium hydroxide can produce a lot of heat and smoke.
Comment on the neutralization of hydrochloric acid?
Hydrochloric acid has many uses for internal and external maintenance. Removes rust from metals thanks to its corrosive action. To do this, dilute with a small amount of water (about 10 ml of acid per 90 ml of water) and apply a few drops on the surface to be treated.
Comment Can the acid be neutralized?
The acid can be neutralized with carbonate, as in the following example. During this neutralization reaction carbon dioxide (CO2) is also produced. Therefore, we can observe the effervescence during this reaction.
Comment on the neutralization of nitric acid?
The acid can be neutralized with lime or caustic soda, but this will cause a violent reaction with the release of a large amount of toxic fumes.
How to neutralize battery acid?
To neutralize acid where needed, it’s best to use a spray bottle filled with ammonia water. You should put enough ammonia in there that the smell is faint (at least not strong or tear gas!). When the ammonia evaporates, it will neutralize what you have to do and where there is no more acid, there will be none.
How to neutralize caustic soda?
Caustic soda is an alkaline solution with a high pH, above 12, and an acid solution with a low pH, below 6. The acid lowers the pH of the soda and it is necessary to have a neutral pH (6 and 7). ) to reach out to neutralize the soda.
How hydrochloric acid and water mix?
For dilution in a large plastic bucket, pour in 4 volumes of water, then carefully add to 1 volume of acid. Always pour acid into water, not water into acid. In fact, during the mixing of a chemical reaction with the release of a large amount of heat.