To connect the washing machine to a dishwasher, simply install it next to a cold water pipe connection, and then attach a branch pipe to the drain pipe. They must then be tightened against the tube to puncture it and create a bypass that allows a second device to be connected.
Which connection for a dishwasher?
It is imperative that the dishwasher be plugged into an earthed socket that is at least 1 meter away from the water point. This outlet must be protected by a short-circuit current rating of at least 16A. If possible, reserve a ground connection for connecting the dishwasher.
How to connect the drain of a washing machine?
In general, the drain pipe is made of PVC and is equipped with an elbow that acts as a siphon. Connect the washing machine water drain hose to the general drain hose. The washing machine water drain pipe should not be pushed too far into the general drain pipe to avoid backflow.
How to install a washing machine without a water supply?
If you can’t get a faucet near your washing machine, you’ll need to install one on the nearest pipe. The first method is to install a self-piercing faucet. You have to put the tap on the pipe and turn it like a screw. The faucet then pierces the pipe itself
How to install a dishwasher next to the sink?
Under the sink is the siphon for draining the dirty water from your dishwasher and the water inlet connection. If the latter is protected by a cap, you will have to remove it with an adjustable wrench. Route the hoses from your dishwasher to these two fittings
What water supply for dishwashers?
Start by connecting the dishwasher to the faucet: Check that the faucet is well connected to a cold water supply (avoid hot water pipes). In this case, all you have to do is connect the water inlet hose of the dishwasher to the tap.
How do I connect the cables to a dishwasher?
The hose must be so efficient that it does not move when the water pressure is high. Connect your dishwasher to the earth socket, which must be 16A. Note that the outlet must be relatively far from your water supply to avoid short circuits
How do I connect a new dishwasher?
Power and water connection Always connect your device to a grounded socket. This must remain easily accessible. Do not use an extension cord or multiple socket. Check that the device does not pinch the power cable of the power supply
Who can connect a dishwasher?
Note that installing a dishwasher in a location far from the water supply and sewer drainpipes may require the work of a plumber and an electrician.
How big is the drain of a washing machine?
The drain pipe must be between 60 cm and 90 cm high (*). It is recommended to use a vertical pipe with a height of 65 c
How do I connect the drain of a dishwasher?
All you have to do is connect the end of the dishwasher’s water inlet hose to the opening of the water inlet faucet. The connection is made by making the dishwasher’s supply hose visible on the tap, after interposing a common fiber. Open the faucet to check if the connection is tight.
How do I position the drain hose of the dishwasher?
For a good fit, the diameter of your dishwasher drain pipe needs to be 40mm, as does the drain under your tap. It is recommended to install it at a height of 52 cm from the ground.
How do I install a water intake?
Loosen the flange from the self-piercing faucet by pouring the nut onto the faucet’s threads. Place the flange around the pipe, the elastomeric seal face against the pipe. Gently screw the faucet into the bride until it pierces the water inlet pipe. Screw in the nut attached to the valve fully and tighten
How do I connect 2 machines to one water supply?
Good evening, simply plug a Y available in a hardware store onto your current water supply and connect the two machines to it. They have the plain Y and the mini-shutter Y on each branch to better isolate one machine or the other if it’s broken
How to transplant when water arrives?
The transplant takes place directly on an existing water pipe. The principle can also be applied to drain pipes, for example to connect the drain pipe of a washing machine.
Where to drain washing machine water?
For example, in order to correctly drain the dirty water from the tank, a washing machine must have a pipe with a minimum internal diameter of 32 mm, extended by a vertical water seal of 60 cm. A siphon with an inspection plug is useful for maintenance.
How do I know if I can install a dishwasher?
It is imperative that the dishwasher be plugged into an earthed socket that is at least 1 meter away from the water point. This outlet must be protected by a short-circuit current rating of at least 16A. If possible, reserve a ground connection for connecting the dishwasher.
How to install a dishwasher drain hose?
For a good fit, the diameter of your dishwasher drain pipe needs to be 40mm, as does the drain under your tap. It is recommended to install it at a height of 52 cm from the ground.
Where should the dishwasher be placed in the kitchen?
The best location for your dishwasher would therefore be closer to the sink or under the worktop. You can also use the skills of a professional to install the unit flush under the countertop.