Are Shimano 9 and 10 speed compatible?
The 9 speed rear derailleur (Shimano mtn) works great with the 10 speed road derailleurs.
Are Shimano 9 and 10 speed cassettes interchangeable?
Interestingly, the reverse isn’t always true, you can’t run a 9-speed cassette on all 10-speed hubs. Shimano’s special 10-speed hubs are designed to be compatible only with 10-speed cassettes, and like most software, backward compatibility doesn’t work as well as backward compatibility.
Are 9 and 10 speed chains the same?
The inside width/pulley width of the 9 and 10 speed chains is the same: 2.18mm. The difference is only in the distance between the panels. 9 and 10 speed chainrings do not have the same spacing, but the differences are small.
Does a 9 speed derailleur work with a 10 speed derailleur?
The pull is constant, but the different gearing means that all 10 teeth require less force. so this will work. YOU CANNOT USE A SRAM GEARBOX WITH SHIMANO SWITCHES AND YOU CANNOT USE A 10-SPEED GEARBOX WITH 9-SPEED SWITCHES. YOU CANNOT USE A SRAM GEARBOX WITH SHIMANO SWITCHES AND YOU CANNOT USE A 10-SPEED GEARBOX WITH 9-SPEED SWITCHES.
Are 9 and 10 speed cassettes the same width?
For the Shimano brand, their 9 speed cassettes have an extra sprocket added to the 8 speed cassette and the overall width remains the same. …The same goes for the 10-speed cassette, which is still the same width as the 8-speed cassette. This makes it 10 times a bit tighter.
Is it possible to use a 10 speed cassette on a 9 speed bike?
7 answers. The distance between 9 and 10 speeds is adjustable with a switch. The 10-speed derailleur works with either a 9-speed or 10-speed gearbox and cassette.
Are all Shimano cassettes compatible?
SRAM and Shimano cassettes are interchangeable on road and mountain bikes because the distance between the sprockets is the same.
What is the difference between 9 and 10 speed chain?
The main difference between a 9-speed chain and a 10-speed chain is that the 10-speed chain is thinner thanks to the 10-speed cassette, which means the chain is lighter.
Can a 9 speed quick link be used with a 10 speed chain?
A 10 speed chain may not work with a 9 speed chain because the feed link is tighter than the chain and results in a stiff link.
Is it possible to replace a 9 speed cassette with a 10 speed cassette?
Yes, if you also put everything else at 10 km/h. Don’t mix a 9 speed chain or front derailleur with a 10 speed cassette, the gap is too tight. You should be ripping off anyone who told you that a 10 speed cassette is wider than a 9 speed.
Are Shimano 9 and 10 speed compatible?
The 9-speed derailleur is not compatible with the 10-speed derailleur. The width of the chain and sprocket is the biggest issue. The 10 speed derailleur pulleys are narrower and the 10 speed chain does not fit properly on the 9 speed derailleur idler pulleys.
Should switches and switches be the same?
In general, it’s best not to mix transmission components from different brands. While things like cranks, chains, and cassettes are mostly compatible between brands, front derailleurs and derailleurs tend to be incompatible.
Does a 9 speed chain work on a 10 speed?
In most cases, a 10-speed chain works perfectly fine with a 9-speed cassette because it’s thin enough to allow the rear sprockets to move up and down without friction or skipping.
Will an 11 speed derailleur work with a 10 speed derailleur?
The 10 and 11 speed shifters are interchangeable. The difference is that the 10 speed derailleur doesn’t like a cassette sprocket larger than the 36 tooth sprocket it was designed for, whereas the 11 speed derailleurs are designed for 40 and 42 tooth gears and look be able to handle them bigger